To set up your modem, simply open a web browser on your computer and type the default gateway address 192.168.0.1 in the address bar.
Make sure your ethernet cable is plugged into the Red "WAN/Internet" port on the back of the router.
The username and password will depend on the original settings entered during quick setup. You may need to reset the router (button on the back of the router) and run through quick setup again to choose a password.
To configure for our network visit: Settings > Internet and make sure the settings match the photo below:
Make sure VLAN Tagged is disabled and then click save. Wait 30 seconds and your router should now connect.