Follow

Configuring Netgear Nighthawk

Fibre:

Type www.routerlogin.com or www.routerlogin.net into the address bar.

A login window will appear. The default username and password is usually admin/password.

Does your ISP require a login = No
Transfer Mode = Eth
Connection Type = DHCP
IPV4 = Get Dynamically from ISP
DNS = Get dynamically from ISP
MAC Clone = Do not clone
VLAN Settings = Disable both

VDSL:

Type www.routerlogin.com or www.routerlogin.net into the address bar.

A login window will appear. The default username and password is usually admin/password.

Does your ISP require a login = No
Transfer Mode = PTM
DSL Mode = VDSL2
IPV4 = Get Dynamically from ISP
DNS = Get automatically from ISP
MAC Clone = Do not clone
VLAN Settings = Enable both
VLAN ID = 10
Priority = 0

media-20170407.png

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments